Welcome to the Bello – Introduction and Setup Guide! This page will walk you through the simple setup process and a short description of your new Bello Lamp and provide helpful tips for optimal use.
Introduction
Bello, is a large-scale 3D-Printed light fixture and the most significant piece in our collection. Designed as a true architectural statement, its form features two distinct, textured volumes: a tall, luminous cylinder that casts a soft, expansive glow, anchored by a wide, sculptural dome below. The fine vertical pleating creates a captivating rhythm of light and shadow, turning this pendant into a mesmerizing focal point that commands any modern space.
Bello Suspended Lamp: Step-by-Step Installation Guide
-
Prepare the Light Assembly: Begin by gathering the 3D-printed lamp body and the suspended lighting fixture. Ensure all parts are laid out on a clean, soft surface to protect the textured finish.
-
Attach the Main Suspended Rod: Thread the suspended rod through the top of the lamp body. Secure it by carefully tightening the connection point to ensure the lamp is centered and stable.
-
Secure the Mounting Base: Position the mounting base against your ceiling. Use a screwdriver to firmly attach it to the pre-installed electrical box or ceiling bracket using the provided screws.
-
Connect the Electrical Wiring: Feed the electrical wires through the center of the mounting base. Connect the corresponding wires according to your local safety standards and secure them with wire connectors.
-
Adjust the Cord Length: Pull the cord through the mounting base to your desired hanging height. Once set, tighten the cord grip on the base to hold the lamp securely in place.
-
Attach the Finishing Cap: Slide the decorative finishing cap up the rod and twist it into the mounting base to hide the wiring and create a clean, seamless look.
-
Power On and Enjoy: Once the fixture is securely mounted, turn on the power. Your Bello lamp is now ready to illuminate your space with its beautiful, organic glow.
End Notes
We hope the detailed guide provided has been helpful and informative.
For further help contact us at hello@onegoodobject.com